On August 18th, a Chip Seal project took place in Gaston, Indiana. This project was completed by the Delaware County Highway Department. Chip seals are used to prevent water intrusion into a pavement and create a high friction surface for safety. Chip seal emulsions can be polymer modified to improve aggregate retention and provide for a quicker return to traffic.
Improving the resilience of infrastructure helps advance a more sustainable transportation network.
Pavement preservation is a more cost-effective and environmentally friendly way to extend the life of your roadways and make public funding go further. A pavement preservation strategy is proven to produce fewer greenhouse gas emissions, expend less energy, and give faster application times than the alternative conventional approach, in addition to being cost-effective.
An Economic Alternative to Full Reconstruction
Cold Constructed Asphalt Pavement (CCAP®) is a cold mix asphalt that is created by combining aggregate and a chemically modified asphalt and mixing the two ingredients at ambient temperature. The cold mix may be stockpiled for weeks to a few months and then placed using a paver for road repair such as patching potholes or adding a new layer to low-volume roads. A chip seal is often placed over the cold mix.
Chip seals are an application of asphalt emulsion or chemically modified asphalt, followed by a layer of aggregate which is rolled and embedded into the emulsified asphalt. The process may be repeated to create a double or triple chip seal.
Fog Seal Treatments can be a valuable aid to renew weathered asphalt surfaces while also improving the appearance of the surface.
A fog seal is a single application, typically light, of emulsified asphalt to an existing asphalt road surface. This type of maintenance treatment can be a valuable aid to renew weathered (oxidized) asphalt surfaces, improve the surface appearance, seal minor cracks and surface voids, and inhibit raveling.
On July 29th a fog seal project took place in Morgan County, Indiana. The pictures in this article are from that project.
Any day is a beautiful day to recycle pavement. This particular project took place earlier this week in Martinsville, IN with our Cold-In-Place Recycling (CIR) technology. CIR is a cost-effective and sustainable method of constructing a recycled asphalt-bound layer that reduces trucking and construction time and saves natural resources.
With an increasing emphasis on infrastructure, the reuse of valuable existing resources is a critical component in a pavement manager’s arsenal. According to research, the advanced technologies used in recycling and reclamation processes can provide major benefits such as:
The asphalt industry is in a good place, but more work is being done to get even better, more sustainable and resilient if you will. The world’s most recycled material is asphalt. A report from the Federal Highway Administration shows that 80% of the asphalt pavement that’s removed each year during widening and resurfacing projects is reused.
CIR is a process that removes cracks and other pavement distresses. CIR is a rehabilitation technique where pavement is milled, crushed, and mixed in place with a stabilizing emulsion or foamed asphalt and then placed with conventional paving equipment. Roads should be evaluated beforehand for suitability for the CIR process.
Asphalt Materials has been focused on building longer-lasting, safer roads since 1956. We have the full support of the Heritage Research Group Laboratories to help us achieve this objective. We also have extensive knowledge in recycling products and processes, combined with the technical expertise gained from years of experience. To learn more about our AMICYCLE™ products, visit our products page. https://asphalt-materials.com/products/
J-Band® and CCAP® are registered trademarks of Asphalt Materials, Inc.
AMIBIND™, AMIBOND™, AMICYCLE™, AMIGUARD™ and AMISEAL™ are trademarks of Asphalt Materials, Inc.
Our colleagues Megan Yount, from Heritage Research Group, and Dan Swiertz, from our Portage, WI location, will be presenting at the Asphalt Recycling & Reclaiming Association (ARRA) regional seminar. Join them Wednesday, August 17th at 8:15 AM as they discuss Pavement Preservation Techniques and give an overview on sustainability.
What is an Asphalt Emulsion?
Asphalt Emulsions are a mixture of an asphalt base, water, and emulsifier (soap) that is primarily graded on the curing rate and ion charge. There is interest in the usage of emulsions for several reasons. The first reason is that an asphalt emulsion does not require a petroleum solvent to make it liquid, and in most cases does not require additional heat which helps save energy.
Name: James Stephen Roush II
Title: Cicero Plant Manager
Location: Cicero, IL
How long have you worked with AMI?
I started at AMI in March of 2022.
Location: Warsaw, Indiana
2820 E. Durbin St. Warsaw, IN 46580
Hours of Operation: Monday-Friday, 6:30am – 3:30pm
Office: 574-267-5076
History:
This plant was originally located in Columbia City and was owned by Bituminous Materials and moved to Warsaw in 1975. The Warsaw plant has been part of the AMI family since 2009.
Products:
We provide different emulsion products out of this facility including non-tracking and polymer modified.
Fun Facts:
Truck & Rail access
At AMI, our dedicated team of experts are ready and available to help meet all your construction and materials needs. We specialize in asphalt emulsions, polymer modified binders, cold mix, asphalt emulsion seal coat base, crack sealants and more. With our talented laboratory technicians and hard-working plant staff, creating the highest quality asphalt emulsion products is our number one priority. We provide the finest asphalt materials within our customer’s budgets, specifications and time frame without sacrificing quality. We keep you up to date on the latest practices and materials, so you don’t miss a beat when it comes to your roads.
Our products are customized to fit your needs. View our featured products by application below. Then get in touch with us. We are more than happy to answer any questions that arise for your next road project. https://asphalt-materials.com/products/
Our customers know they can rely on us for their superior road solutions. If you have general questions about products, customization, locations, etc. reach out to our Warsaw team today for your road repair and maintenance needs.
Recent Comments