Sustainable Infrastructure Project in Gogebic County Michigan

Cold In-Place Recycling

In 2021, the Gogebic County Road Commission constructed their first recycling job.  The first phase, which was approximately 3 miles of the Lake Road Cold In-Place Recycle (CIR) project, was finished in 2021. There are approximately 2.5 miles that are projected to finish in 2022. This final section of the roadway to be completed in 2022 is to repave the stretch of road from Little Girls Point to the Wisconsin border.

Read More

What is a Sustainable Rehabilitation Technique for Asphalt Materials?

Bartholomew County, Indiana

Full Depth Reclamation (FDR) is a cost effective and sustainable rehabilitation technique that combines the entire bituminous pavement thickness and a predetermined portion of the underlying aggregate material into a flexible, homogenous stabilized base layer utilizing an asphalt emulsion to provide mixture cohesion and water resistance. FDR is a solution for rehabilitating roads that have poor structure. The FDR is typically followed with an overlay of hot mix asphalt.

This full depth reclamation project took many parties from start to finish. Milestone Contractors, Inc. submitted the bid, Asphalt Materials, Inc. supplied the engineered emulsion and Heritage Research Group provided the sampling, mix design and quality control. 

This particular project was on Hartman Drive in Bartholomew County, Indiana. It consisted of an eight-inch (8″) full depth reclamation on one thousand, one hundred feet (1,100′) of existing recycled asphalt pavement (RAP) road and one hundred – 70 feet (70′) of existing asphalt road. A 3″ hot mix overlay laid in 2 lifts of 1 ½” each was then placed on the new recycled roadway base. 

The County collected and placed the RAP at a depth of 8-9” from another project in the area to build the new roadway base. Milestone then pre-pulverized and graded the entire roadway at a depth of 8”. A second pass was made with the reclaimer and the engineered emulsion was injected and the emulsified material was graded and compacted. After the final cure the recycled base was overlaid with two 1 ½” lifts of HMA (Hot Mix Asphalt), striped and opened to traffic. 

Asphalt Materials Inc., is a proud member of The Heritage Group and brings nearly 65 years of experience to the asphalt industry and road construction projects. Our teams of professionals are dedicated to creating longer-lasting, safer roads with quality, reliable asphalt materials.

Our family of companies want to ensure we are leaving the world in a better place for future generations. As The Heritage Group continues to expand capabilities and investments in the sustainability space, the AMI team is also focused on sustainability in a number of different areas. We will be reporting on these in future articles.

#FDR #Infrastructure #STEM STEMEducation #Sustainability #LongerLastingRoads #HotMixAsphalt

[Note: Bids for this project opened on March 29, 2021]

Read More

DuPage County Illinois Finds Success Protecting Pavements

Studies have shown that longitudinal joints in pavements are often the weakest areas of a road. Typically the joints are low in density, high in voids and thus are highly permeable. These areas become conduits to air and water infiltration which leads to damage and premature pavement failure. (1)

During the 2016 construction season a new method of longitudinal joint construction was specified in Illinois. This new method is a materials approach and is referred to as VRAM(2), a Void Reducing Asphalt Membrane. Applying VRAM at the time of construction helps fill the pavement voids, thus reducing the permeability in this most critical area.

As part of their evaluation, DuPage County ensured that test cores were taken on different joint constructions, such as VRAM and joint heater. DCT, I-FIT, density, and asphalt binder grading tests were performed to compare the different joint construction methods. The report summarized that the addition of the VRAM contributes to a more durable joint by partially filling the joint and adjacent mat air voids. The joint will be much less permeable and less likely to allow water infiltration.

Read More